GI PLAST | Policarbonato

Policarbonato

Gracias a muchos años de experiencia en el proceso de extrusión de diferentes tipos de polímeros, GI PLAST fabrica perfiles a medida del cliente, y asegura un soporte competente, flexible e innovador para satisfacer las necesidades de proyectos de diseño y aplicaciones muy diversas y a la vanguardia.

	Property	Test Condition	Unit	Standard	Value
MECHANICAL	Tensile modulus	1 mm/min	MPa	ISO 527-1,-2	2400
	Yield stress	50 mm/min	MPa	ISO 527-1,-2	66
	Yield strain	50 mm/min	%	ISO 527-1,-2	6.2
	Nominal strain at break	50 mm/min	%	ISO 527-1,-2	>50
	Stress at break	50 mm/min	MPa	ISO 527-1,-2	65
	Strain at break	50 mm/min	%	b.o. ISO 527-1,-2	100
	Tensile creep modulus	1 h	MPa	ISO 899-1	2200
	Tensile creep modulus	1000 h	MPa	ISO 899-1	1900
	Flexural modulus	2 mm/min	MPa	ISO 178	2400
	Flexural strength	2 mm/min	MPa	ISO 178	100
	Flexural strain at flexural strength	2 mm/min	%	ISO 178	7.3
	Flexural stress at 3.5 % strain	2 mm/min	MPa	ISO 178	74
	Charpy impact strength	23 °C	kJ/m²	ISO 179-1eU	N
	Charpy impact strength	-30 °C	kJ/m²	ISO 179-1eU	N
	Charpy impact strength	-60 °C	kJ/m²	ISO 179-1eU	N
	Charpy notched impact strength	23 °C; 3 mm	kJ/m²	ISO 7391/b.o. ISO 179-1eA	70P
	Charpy notched impact strength	-30 °C; 3 mm	kJ/m²	ISO 7391/b.o. ISO 179-1eA	16C
	Izod notched impact strength	23 °C; 3.2 mm	kJ/m²	b.o. ISO 180-A	80P
	Izod notched impact strength	-30 °C; 3.2 mm	kJ/m²	b.o. ISO 180-A	14C
	Puncture maximum force	23 °C	N	ISO 6603-2	5600
	Puncture maximum force	-30 °C	N	ISO 6603-2	6500
	Puncture energy	23 °C	J	ISO 6603-2	60
	Puncture energy	-30 °C	J	ISO 6603-2	65
	Ball indentation hardness		N/mm²	ISO 2039-1	13

	Property	Test Condition	Unit	Standard	Value
THERMAL	Glass transition temperature	10°C/min	°C	ISO 11357-1,-2	146
	Temperature of deflection under load	1.80 MPa	°C	ISO 75-1,-2	128
	Temperature of deflection under load	0.45 MPa	°C	ISO 75-1,-2	140
	Vicat softening temperature	50 N; 50 °C/h	°C	ISO 306	146
	Vicat softening temperature	50 N; 120 °C/h	°C	ISO 306	147
	Coefficient of linear thermal expansion, parallel	23 to 55 °C	10-4/K	ISO 11359-1,-2	0.65
	Coefficient of linear thermal expansion, transverse	23 to 55 °C	10-4/K	ISO 11359-1,-2	0.65
	Burning behavior UL 94 (1.5 mm)	1.5 mm	Class	UL 94	HB
	Burning behavior UL 94	3.0 mm	Class	UL 94	HB
	Burning behavior UL 94	6.0 mm	Class	UL 94	HB
	Oxygen index	Method A	%	ISO 4589-2	28
	Thermal conductivity	23 °C	W/(m·K)	ISO 8302	0.20
	Resistance to heat (ball pressure test)		°C	IEC 60695-10-2	139
	Relative temperature index (Tensile strength) [UL recognition]	1.5 mm	°C	UL 746B	125
	Relative temperature index (Tensile impact strength) [UL recognition]	1.5 mm	°C	UL 746B	115
	Relative temperature index (Electric strength) [UL recognition]	1.5 mm	°C	UL 746B	125
	Glow wire test (GWFI)	0.75 mm	°C	IEC 60695-2-12	875
	Glow wire test (GWFI)	1.5 mm	°C	IEC 60695-2-12	875
	Glow wire test (GWFI)	3.0 mm	°C	IEC 60695-2-12	960
	Burning rate (US-FMVSS)	>=1.0 mm	mm/min	ISO 3795	Passed
	Flash ignition temperature		°C	ASTM D1929	480
	Self ignition temperature		°C	ASTM D1929	550

	Property	Test Condition	Unit	Standard	Value
ELECTRICAL IMPACT	Relative permittivity	100 Hz		IEC 60250	3.1
	Relative permittivity	1 MHz		IEC 60250	3.0
	Dissipation factor	100 Hz	10^-4	IEC 60250	8.0
	Dissipation factor	1 Hz	10^-4	IEC 60250	95
	Volume resistivity		Ohm·m	IEC 60093	1E14
	Surface resistivity		Ohm	IEC 60093	1E16
	Electrical strength	1 mm	kV/mm	IEC 60243-1	36
	Comparative tracking index CTI	Solution A	Rating	IEC 60112	250
	Comparative tracking index CTI M	Solution B	Rating	IEC 60112	100M
	Electrolytic corrosion		Rating	IEC 60426	A1

	Property	Test Condition	Unit	Standard	Value
OTHER PROPERTIES	Water absorption (saturation value)	Water at 23 °C	%	ISO 62	0.30
	Water absorption (equilibrium value)	23 °C; 50 % r. h.	%	ISO 62	0.12
	Density		kg/m³	ISO 1183-1	1200
	Water vapor permeability	23 °C;85 % RH; 100 μm film	g/(m²·24 h)	ISO 15106-1	15
	Gas permeation	Oxygen; 100 μm film	cm³/(m²·24 h·bar)	b.o. ISO 2556	650
	Gas permeation	Oxygen; 25.4 μm (1 mil) film	cm³/(m²·24 h·bar)	b.o. ISO 2556	2760
	Gas permeation	Nitrogen; 100 μm film	cm³/(m²·24 h·bar)	b.o. ISO 2556	120
	Gas permeation	Nitrogen; 25.4 μm (1 mil) film	cm³/(m²·24 h·bar)	b.o. ISO 2556	510
	Gas permeation	Carbon dioxide; 100 μm film	cm³/(m²·24 h·bar)	b.o. ISO 2556	3800
	Gas permeation	Carbon dioxide; 25.4 μm (1 mil) film	cm³/(m²·24 h·bar)	b.o. ISO 2556	16900
	Bulk density	Pellets	kg/m³	ISO 60	660

	Property	Test Condition	Unit	Standard	Value
MATERIAL SPECIFIC PROPERTIES	Refractive index	Procedure A		ISO 489	1.586
	Haze for transparent materials	3 mm	%	ISO 14782	0.8
	Luminous transmittance (clear transparent materials)	1 mm	%	ISO 13468-2	89
	Luminous transmittance (clear transparent materials)	2 mm	%	ISO 13468-2	88
	Luminous transmittance (clear transparent materials)	3 mm	%	ISO 13468-2	88
	Luminous transmittance (clear transparent materials)	4 mm	%	ISO 13468-2	87

Policarbonato resistente al fuego

	Property	Test Condition	Unit	Standard	Value
MECHANICAL	Taber Abrasion	CS-17, 1 kg	mg/1000cy	SABIC Method	9
	Tensile Stress, yield	50 mm/min	MPa	ISO 527	65
	Tensile Stress, break	50 mm/min	MPa	ISO 527	70
	Tensile Strain, yield	50 mm/min	%	ISO 527	7
	Tensile Strain, break	50 mm/min	%	ISO 527	>70
	Tensile Modulus	1 mm/min	MPa	ISO 527	2350
	Flexural Stress, yield	2 mm/min	MPa	ISO 178	95
	Flexural Modulus	2 mm/min	MPa	ISO 178	2350
	Hardness	H358/30	MPa	ISO 2039-1	95

	Property	Test Condition	Unit	Standard	Value
THERMAL	Thermal Conductivity		W/m-°C	ISO 8302	0.2
	CTE	23°C to 80°C, flow	1/°C	ISO 11359-2	7.E-05
	Ball Pressure Test	125°C +/- 2°C		IEC 60695-10-2	PASSES
	Vicat Softening Temp	Rate B/50	°C	ISO 306	155
	Vicat Softening Temp	Rate B/120	°C	ISO 306	156
	HDT/Be	0.45MPa Edgew 120104 sp=100mm	°C	ISO 75/Be	148
	HDT/Ae	1.8 MPa Edgew 120104 sp=100mm	°C	ISO 75/Be	135

	Property	Test Condition	Unit	Standard	Value
ELECTRICAL	Volume Resistivity		Ohm-cm	IEC 60093	>1.E+15
	Surface Resistivity	ROA	Ohm	IEC 60093	>1.E+15
	Dielectric Strength	in oil, 3.2 mm	kV/mm	IEC 60243-1	17
	Relative Permittivity	1 MHz		IEC 60250	2.7
	Dissipation Factor	50/60 Hz		IEC 60250	0.001
	Dissipation Factor	1 MHz		IEC 60250	0.01
	Relative Permittivity	50/60 Hz		IEC 60250	2.7

	Property	Test Condition	Unit	Standard	Value
IMPACT	Izod Impact	unnotched 80103 +23°C	kJ/m²	ISO 180/1U	NB
	Izod Impact	unnotched 80103 -30°C	kJ/m²	ISO 180/1U	NB
	Izod Impact	notched 80103 +23°C	kJ/m²	ISO 180/1A	11
	Izod Impact	notched 80103 -30°C	kJ/m²	ISO 180/1A	10
	Charpy 23°C	V-notch Edgew 80103 sp=62mm	kJ/m²	ISO 179/1eA	11
	Charpy -30°C	V-notch Edgew 80103 sp=62mm	kJ/m²	ISO 179/1eA	10
	Charpy 23°C	Unnotch Edgew 80103 sp=62mm	kJ/m²	ISO 179/1eU	NB
	Charpy -30°C	Unnotch Edgew 80103 sp=62mm	kJ/m²	ISO 179/1eU	NB

	Property	Test Condition	Unit	Standard	Value
IMPACT	Flame Class Rating (3)	UL Recognized, 94V-0	mm	UL 94	1.5
	Glow Wire Flammability Index	850°C, passes at	mm	IEC 60695-2-12	1
	Glow Wire Flammability Index	960°C, passes at	mm	IEC 60695-2-12	1

Nella gamma profili GI PLAST sono presenti diverse tipologie di materiali e di finiture, tra i più richiesti:
POLICARBONATO un materiale dall’ ottima trasparenza ed elevate prestazioni poiché adeguato all’impiego per un’ampia scala di temperature d’utilizzo, eccellente resistenza meccanica e alta modellabilità.
Ideale per applicazioni interne ed esterne grazie alla protezione LONGLIFE, che preserva dal deterioramento provocato dai raggi UV le caratteristiche meccaniche ed ottiche del profilo, garantendo il suo utilizzo e la sua finitura per 10 anni.
Un’innovazione estetica della protezione LONGLIFE di grande successo è il MATT LED CONTROL che oltre alle caratteristiche protettive sopra citate, assicura una diffusione omogenea della luce: prestazione ideale per i LED poiché rende invisibili gli HOT SPOTS.

En la gama de perfiles GI Plast hay diferentes tipos de materiales y acabados, y entre las más opulares:
POLICARBONATO es un material con alta transparencia y altas prestaciones apropiadas para diferentes temperaturas, excelente resistencia mecánica.
Ideal para aplicaciones en interiores y al aire libre gracias a la protección duradera, que conserva del deterioro causado por los rayos UV, garantizando su uso y su acabado por 10 años.
Una innovación estética de la calidad LONG LIFE es el MATT LED CONTROL que además de las caracteristicas de protección sobra mencionadas, asegura una difusión homogénea de la luz: ideal para el desempeño de LED ya que hace invisible los HOT SPOTS.